Your local contact in

We are looking forward to your request!

Personal data

Please fill in the mandatory field.

Please fill in the mandatory field.

Please fill in the mandatory field.

Please enter a valid e-mail address.

Please fill in the mandatory field.

Please fill in the mandatory field.

Please fill in the mandatory field.

What topic can we help you with?

Please fill in the mandatory field.

/ 350 Characters

Please note the maximum characters.

* Please fill in the mandadory field

Please accept our data protection.

Unfortunately, your request could not be sent due to a system error. Please try again later.

Picture shows plastic fitting

Solutions for Plastic Fittings & Water Technology

Reproducibly Processing Demanding Materials

There are many challenges in the production of plastic fittings and pipe systems. Bulky molds and frequent mold changes make smooth production more difficult. Processing high-performance thermoplastics such as PSU and PPSU is demanding for the plasticizing unit and process control. At ENGEL you will find the right injection molding machines and the knowledge you need.

Your Advantages with ENGEL Injection Molding Machines
Compact, tie-barless injection molding machines with large mold space
Picture shows mold installation area of an ENGEL injection molding machine

Molds for plastic fittings are often very large but require low clamping force. Our tie-barless victory series and the compact duo two-platen machine have a large and easily accessible mold space. You only invest in the clamping force that the mold needs. For bulky injection molds, our duo machine comes in wide-platen versions with platens that are approximately 20% larger but have the same footprint.

Up to 90% machine utilization thanks to fast mold changes
Picture shows mold change on a tie-barless injection molding machine from ENGEL

Frequent mold changes can reduce the productivity of your injection molding machines. The large and easily accessible mold area of our victory and duo series allows for a quick mold change. In addition, the "guided mold change" function on our CC300 control unit simplifies the changeover process for your operators with step-by-step instructions and semi-automated processes. You reduce your downtime and increase your productivity.

Processing demanding materials and recyclates
Picture shows plastic material

Plastic fittings and water technology parts are often made of special materials such as PSU, PPSU or PVC. These plastics are difficult to process and demanding for machine and operator. We develop plasticizing systems in-house, which enables us to provide the right components for every material. You also benefit from our knowledge of processing high-performance thermoplastics and recyclates.

Effortlessly controlling high shot weights with large machines
Picture shows large injection molding machine from ENGEL

Customers who need large injection molding machines rely on ENGEL. We develop and build various injection molding machines with clamping forces of over 50,000 kN. We are your partner for extra-large injection molded parts: you can effortlessly process shot weights of over 150 kg into retention tanks or plastic fittings for pipe systems. From us, you get a solution that is customized to your requirements.

Products and Services for Production of Plastic Fittings and Water Technology
Picture shows tie-barless injection molding machine from ENGEL

Tie-barless Injection Molding Machine

victory

The patented tie-barless injection molding machine offers maximum space in the mold area

  • For large molds

  • Quick mold change

  • Easy integration of automation

Picture shows compact cell from ENGEL

Compact Cell

More space for your molds, a compact footprint and safety technology systems included

  • For large molds

  • Easy integration of automation

  • CE-certified

Picture shows user of an injection molding machine from ENGEL

Plasticizing Assistant

iQ melt control

With the digital plasticizing assistant, you can process special materials effortlessly

  • Fully automatic adjustment to the screw speed

  • Gentle plasticizing

  • Optimum melt quality

Picture shows Head of Strategic Development at Peštan d.o.o., Serbia

The ENGEL victory significantly reduced our set-up times. With the ENGEL machines, we achieve utilisation times of over 90%.

Milan Nikolić, Head of Strategic Development at Peštan d.o.o., Serbia
Picture shows Global Key Account Manager Technical Moulding & Teletronics at ENGEL Austria
Are you looking for innovative solutions for the production of plastic fittings and water technology parts?

I will be happy to advise you on your options and benefits with ENGEL as partner.

Picture shows employees of Peštan and ENGEL
Reduced Unit Costs and Increased Precision

Peštan in Serbia manufactures plastic fittings with tie-barless victory injection molding machines. Read how ENGEL contributed to higher efficiency, precision, and flexibility for the customer.

  • Two-Cavity Mold for Fitting on Compact Injection Molding Machine

    The tie-barless victory 80 machine and the extended safety gate allow the fitting mold to be installed in a small injection molding machine (800 kN clamping force).

  • Mold Change in Under 10 Minutes

    What do you need? A tie-barless injection molding machine, a Stäubli quick clamping system, and the automatic transfer of mold data to the machine.

Examples of Plastic Fittings and Water Technology Parts

Markus Lettau

Molding Industry Business Advisor

+1 (717) 767 2016

Write us

The ENGEL team is happy to support you with extensive knowledge in the field of injection molding.

The browser you are using is outdated.

Internet Explorer is no longer supported. Please switch to an up-to-date browser to use the website to its full extent.

The browser you are using is outdated.

Internet Explorer is no longer supported. Please switch to an up-to-date browser to use the website to its full extent.