- Home
- Blog
- Products & solutions
- Precision & performance for innovative laboratory diagnostics products
Precision & performance for innovative laboratory diagnostics products
Röchling Medical has developed innovative contact shells for easy removal and safe transport of surface samples. These precision components are manufactured on an all-electric ENGEL e-motion injection moulding machine.
-
medical
-
systems solution
-
cost effectiveness
Special contact shell design places high demands on the production process
Röchling Medical is an innovative development partner and contract manufacturer for leading global pharmaceutical, biotech and medical technology companies. For some time now, Röchling has been manufacturing special polystyrene contact trays with improved ergonomics and safety in its production facility for laboratory diagnostics at the German site in Waldachtal: thanks to a sophisticated three-point locking system instead of conventional threads, the lid can be fitted particularly quickly and easily and always remains firmly closed during transport of the samples.
For the production of the contact shells however, the filigree mechanism meant increased demands on precision and process consistency: even the smallest deviations in the geometry of the moving components would mean impaired functionality. At the same time, the shortest possible cycle time is necessary to ensure the cost-effectiveness of production - a must with a production volume of around 12 million units per year. To solve this balancing act, Röchling contacted ENGEL.
The contact shells are produced on a 4+4-cavity mould. The base and cover are assembled fully automatically after removal from the mould.
ENGEL e-motion: All-electric injection moulding machine delivers the necessary precision and performance
The specifications for this laboratory diagnostics application clearly identified ENGEL's all-electric high-performance e-motion series as the most suitable basic machine. Compared to hydraulic or hybrid drives, its powerful, servo-electric direct drives enable significantly faster machine movements with particularly high repeat accuracy - an advantage for the mass production of diagnostic products. In addition, the all-electric drive concept is particularly low in emissions - another relevant advantage for operation under cleanroom conditions.
To best meet Röchling's requirements, ENGEL equipped the 1,600 kN injection moulding machine with several option packages: A clean room package enables absolutely clean production up to class ISO 7 and particularly easy cleaning of all potential sources of contamination. In addition, the PREMIUM version of the electric injection unit delivers the performance required to reliably fill the thin-walled cavities shot after shot: Its servo-electric direct drive is not only particularly powerful, but also offers synchronised movements compared to a belt drive. In combination with the ENGEL smart shut non-return valve, maximum precision is also achieved on the injection side.
Daniel Tobien, Head of Production at Röchling Medical, summarises: "The precision of the all-electric machines is significantly better than that of hydraulic machines. The advantage is particularly evident with short cycle times: switching the electric motors is much easier and faster than with a hydraulic pump or a valve."
The all-electric e-motion 160 injection moulding machine from ENGEL delivers both the necessary performance and repeatability for this demanding application.
Precise temperature control for even greater efficiency
Another essential aspect of injection moulding for laboratory diagnostics is temperature control. Röchling relies on the ENGEL temperature control system to cool the parts in the mould cavities as quickly and evenly as possible. The interaction between the ENGEL e-temp temperature control units and the e-flomo automatic water distributor is precisely controlled by the intelligent iQ flow control assistance system. The ΔT control of iQ flow control permanently monitors the difference between the flow and return temperatures and automatically regulates the flow rate via the e-flomo units in the event of deviations. Ensuring the components are always cooled quickly and optimally while minimising water and energy consumption. Defective components due to temperature control errors are avoided by using iQ flow control. This process also protects the temperature control units and extends their service life.
The e-flomo water distributors automatically guide the exact amount of water needed through the mould.
Rapid realisation of the project with ENGEL
The customer was not just impressed by the machine itself, but also by ENGEL's competent support throughout the entire process: ENGEL demonstrated a deep understanding of Röchling Medical's specific requirements right from the planning phase. In addition to the customised design of the machine, the logistics, commissioning and service from ENGEL ensured a rapid start of production and smooth operation.
Daniel Tobien emphasises: "We are very satisfied with the machine. With the combination of the mould and the automation, high output rates have been achieved. So far, there has not been any machine-related downtime."
From left to right: Christoph Fritz, Medical Sales at ENGEL Germany and Daniel Tobien, Head of Production at Röchling Medical
Why is the e-motion series from ENGEL the right injection moulding machine for the production of laboratory diagnostics?
The all-electric e-motion injection moulding machine from ENGEL delivers high output with high process consistency: the perfect solution for demanding precision components such as the contact shells from Röchling Medical. Thanks to the optional clean room package, it is suitable for the production of medical parts - such as the laboratory diagnostics in this example - up to class ISO 7 and can be individually adapted to customer-specific requirements.
FAQ
In cleanroom manufacturing (e.g. ISO 7), low emissions are crucial. Fully electric machines such as the ENGEL e-motion operate without hydraulic oil, which eliminates the risk of leakages and contamination.
Furthermore, electric drives are enclosed and easy to clean, which minimises particle emissions and meets the strict hygiene requirements for the production of laboratory diagnostics.
With an annual production volume of 12 million units, even minimal process fluctuations lead to high levels of rejections. By the combination of servo-electric direct drives and intelligent assistance systems such as iQ flow control, external influences (e.g. fluctuations in ambient temperature or cooling water quality) are compensated for fully automatically. This ensures 100% repeatable part geometry.
Temperature control is often the key factor in cycle time. The interaction between e-flomo and iQ flow control enables highly precise heat dissipation. As the system regulates the flow rate per cavity, the components are cooled more quickly and more evenly.
This not only significantly reduces cycle time, but also lowers energy consumption – and thus unit costs – by means of demand-based Pump closed loop control.
Yes. The e-motion’s control unit is designed to record all process-relevant data comprehensively. For medical technology companies such as Röchling Medical, this forms the basis for the necessary IQ/OQ/PQ validation.
The machine’s high process consistency also makes it easier to demonstrate process capability (CpK values) to auditors and customers.
Absolutely. Thanks to the PREMIUM injection unit and the high dynamic performance of the e-motion series, the system is ideally suited to thin-walled components with long flow path-to-wall thickness ratios.
The high flexibility in integrating automation solutions makes it possible to efficiently handle even complex assembly processes (such as the lid-to-base assembly mentioned here).
-
medical
-
systems solution
-
cost effectiveness